Sulzer submersible dranaige pump XJ 25
The submersible drainage pump XJ 25 is ideal for pumping water and dirty water mixed with light abrasives. Pumps with built in AquaTronic unit will always have correct direction of impeller rotation, ensuring peak performance and reduced wear. 50 Hz: head max 26 meters, flow max 19 l/s. 60 Hz: head max 30 meters (98 feet), flow max 20 l/s (317 gpm).
Specification
Electric submersible pump. Maximum submergence: 20 m. Protection class IP 68.
Max temperature of pumped medium at max power input and continuous duty 40 ºC.
Max medium density 1100 kg/m3. pH of the pumped medium 5-8. Strainer hole: 7.5 x 22 mm.
Max number of starts 30/hour.
Electric motor
3-phase squirrel-cage induction motor, 50 Hz:
Service factor 1.1. Class F insulation.
Motor rating P2: 2.5 kW. 2 pol.
Speed: 2920 rpm.ŋ: 82.9 (50 %), 86.0 (75 %), 87.0 (100 % load)
Voltage, V |
230 |
400 |
500-550 |
690 |
1000 |
Nominal current, A |
8.8 |
5.1 |
4.3 |
2.9 |
2.0 |
Starting method and motor protection
XJ 25 AT:
Direct on line start (DOL 230-550 V) with built in AquaTronic unit, which automatically adjusts phase order by dual contactors, ensuring correct motor rotation.The AquaTronic unit monitors motor temperature, by use of NTC thermistors built into stator windings, and stops the motor at high temperature. It will also stop the motor at high amperage or if a phase is missing.
XJ 25: Direct on line start with built in contactor. Pumps to be used with VFD or 1000 V must have terminal block instead of contactor. Thermal switches (140 °C, ±5) built into the stator windings are connected to the contactor and stop the pump at high temperature.
Power cable
20 m type H07RN8-F (standard cable):
4 x 1.5 sq.mm. (230-690 V)
20 m type NSSHÖU.../3E (heavy duty cable):
3x2.5+3x2.5/3E+3x1.5 (3 control cables included) (1000 V orterminal block)
3x1.5+3x1.5/3E (230-690 V)
Shaft seal
Double mechanical seal in oil bath.
Primary seal: Silicon carbide on silicon carbide.
Secondary seal: Silicon carbide on carbon.
Bearings
Upper bearing: Single-row deep groove ball bearing.
Lower bearing: Double angular contact ball bearing.
Discharge connections
2 ½", 3" (standard), 4" hose connections.
2 ½", 3", 4" G/B.S.P. threaded connections.
Weight
39 kg (without cable)
Options and accessories
AquaPlug. AquaTronic control panel.
Level sensor. Service data kit.
Zinc anodes. Surface protection coating.
Series connection. Floatation ring.
Discharge connection accessories and hose.
Pump control
|
|
XJ 25 AT |
Features |
XJ 25 |
AT |
AT + Level Sensor |
AT + AquaPlug / AquaTronic Control Panel |
AT + AquaPlug / AquaTronic Control Panel + Level Sensor |
Service Data Kit Read out |
Run mode |
X |
X |
X |
X |
X |
|
Integrated start equipment |
X |
X |
X |
X |
X |
|
Automatic direction of rotation |
|
X |
X |
X |
X |
|
Motor protection high temp |
X |
X |
X |
X |
X |
X |
Motor protection high amp |
|
X |
X |
X |
X |
X |
Protection against missing phase |
|
X |
X |
X |
X |
X |
Level control |
|
|
X |
|
X |
|
Dry run protection |
|
|
X |
|
X |
|
Automatic restarting |
|
|
X |
|
X |
|
Stop mode |
|
|
|
X |
X |
|
E-mode (Automatic stop/run) |
|
|
X |
|
X |
|
Indication of water in oil |
|
|
|
X |
X |
X |
Indication of low motor insulation |
|
|
|
X |
X |
X |
Indication of high or low voltage |
|
|
|
XX |
XX |
X |
Indication of high temperature |
|
|
|
XX |
XX |
X |
Indication of high amp |
|
|
|
XX |
XX |
X |
Indication of phase unbalance |
|
|
|
XX |
XX |
X |
USB cable connection |
|
X |
X |
X |
X |
X |
Crash log (10 latest) |
|
|
|
|
|
X |
Documentation (spare part list, workshop manual) |
|
|
|
|
|
X |
XX = Fault indication when pump is automatically stopped to protect the motor.
Materials
Description |
Material |
EN |
ASTM |
Castings |
Aluminium |
EN 1706:AC-43100 |
ASTM AlSi10mg |
Casing / Fasteners |
Stainless steel |
10088:X5CrNi18-10 (1.4301) |
AISI 304 |
Shaft |
Stainless steel |
10088:X20Cr13 (1.4021) |
AISI 420 |
Impeller |
White cast iron |
EN-GJN-HV600(XCr23) |
ASTM A 532: Alloy III A |
Fasteners |
Stainless steel |
10088:X5CrNiMo 17122 (1.4401) |
AISI 316 |
Wear parts / O-rings |
Nitrile rubber |
|
|
Coating |
2 component epoxy paint 120 μm |
|
|